Hot

PYE Tile Adhesive (0.5kg)

Product Code:
9190003-001001

1 pack of PYE Tile Adhesive (0.5kg)

Only 13 left
RM 8.98

PYE Tile Adhesive is a ready-to-use thin-bed acrylic adhesive for fixing surfaces, including gypsum, plasterboard, wood, asbestos, sheets, etc
It can also be used for bonding insulating material such as foam polystrene, glass or mineral wool.
-Suitable for fixing ceramic tile on walls and floors.
-Can be used on surfaces such as foam, polystyrene, glass or mineral wood.

Tiles are constantly popping up in the house and in need your own tile adhesive for your DIY project? You can get this PYE Tile Adhesive 0.5kg. PYE Tile Adhesive is a ready-to-use thin-bed acrylic adhesive for fixing surfaces, including gypsum, plasterboard, wood, asbestos, sheets, etc. It can also be used for bonding insulating material such as foam polystrene, glass or mineral wool. apart from fixing ceramic tiles on walls and floors. This PYE Tile Adhesive can be adjusted while its wet and the excess adhesive can be removed immediately too. So add this multi-use tile adhesive to the cart now and start working on your DIY project.

Features:
- Apply on the wall or floor
- No tile soaking required and easy to use
- Can be adjusted when wet
- Excess adhesive can be removed immediately

How to use?
The surface to be tiled must be flat, sound and free from dust, grease or other foreign material. Apply PYE Tile Adhesive with a notched trowel and then press the tiles in fimily. Ceramic tiles are fixed dry and should not be pre-soaked. Excess adhesive can be removed immediately with water after application. Grouting can be done as soon asa tiles are firmly set (6-24hours).

Specifications:
Packing: 0.5kg
Coverage:1m square per KG.

Show more
Specifications
BrandPYE
SalesNo
Write Your Own Review
You're reviewing:PYE Tile Adhesive (0.5kg)
Your Rating